Robe Spot 575 XT Specifications download pdf (Page 21)

low/high speed of the fan operating

The fan keeps the adjusted low speed until the temperature exceeds max. inside temperature of the

fixture, then the COLOR SPOT 575 automatically switch from low to high the fan speed.

continuous controlling of the fan speed without the DMX value

This mode is similar to "reG", but the initial level of the fan speed can´t be adjusted by the DMX.

Default settings

Press [Enter] to reset all fixture personalities (not the adjusting functions) to the default values. On the display

will appear "rSt" meaning that the fixture makes the reset. See the table of personality setting and their default positions.

Adjusting the default positions of colour, gobo and effect wheels

By this function you can calibrate and adjust the colour and gobo wheels to their standard/right positions. Use

the [Up] and [Down] keys to browse through the adjusting menu - the display shows step by step these

messages: "PAn, Tilt, SPEd, Col1, Col2, PriS, SGob, rGob, Grot, IriS, Foc, Stro, dimr, FCAL" by which you

can adjust the fixture to the required/desired position (0-255) before the function calibration. Then when the

positioning is finished use the last "FCAL" function (Fixture calibration).

Personality Display Default values

(SHADED)

Pan reverse

Tilt reverse

Movement resolution

Lamp On after switch.

the fixture On

Display intensity

Display- reverse

PAN/TILT feedback

Lamp Off via DMX

Low fan speed

operating

Display-On

Switch On/Off

the lamp light sensor

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27

No comments

Robe Spot 575 XT Specifications Page 21