Robe COLORSPOT 170 AT Specifications download pdf (Page 25)

- Default settings

Press [ Enter ] to reset all fixture personalities (not the adjusting functions) to the default values. On the display

will appear "rSt" meaning that the fixture makes the reset. See the table of personality setting and their default

positions.

8.5 Switching On/Off the lamp

Press the [Mode] button in order to access the main menu. Browse through the menu by pressing the [ Up] and

[Down] buttons until the display shows "LAMP". Confirm by pressing [Enter ] button.

Use the [Up] and [Down] buttons to select "On" to switch On the lamp and "Off" to switch Off the lamp and

press [Enter ] to confirm or [ Mode] to cancel.

Microphone

sensitivity

Music trigger

Personality Display Default values

(SHADED)

Pan reverse

Tilt reverse

DMX

presetting

Lamp On after switch.

the fixture On

Display intensity

Display- reverse

PAN/TILT feedback

Display-On

Lamp Off if DMX

is missing

Lamp Off via DMX

Switch On/Off

the lamp light sensor

Lamp On if DMX

is present

Blackout during

mov. correction

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 36 37

No comments

Robe COLORSPOT 170 AT Specifications Page 25