Robe CitySource 96 WDMX Specifications download pdf (Page 18)

CitySource 96 (RGBW)

FuLL --- Maximum light output.

EcO. --- The light output is decreased by 25%.

In.Po. --- Init effect positions. Use this function to set all effects to the desired positions to which they will move

after switching the fixture on (if DMX is not being received).

Note. If DMX mode 1 is selected, only values set at items “MACr” (macro) and dinr (dimmer) will be accepted.

hoLd --- Holding DMX values. The menu allows to choose behaviour of the fixture if receiving of DMX signal is

breaked.

On --- fixture keeps last received DMX values in memory until new DMX values are not received.

Off --- light output is closed if receiving DMX signal is interrupted.

Note: After switching the fixture on without connected DMX, values set in the menu “In.Po.” will be loaded into

fixture´s memory.

dF.SE. --- Default Settings .The menu item sets all fixture parameters to the default (factory) values.

6.4 Manual mode

Use this menu for control the fixture without connected DMX console.

PrE.C. --- Preset effects control. Select this menu to call up preset positions of the channel effects.

Man.C. --- Manual effect control. Select this menu to control all channels via buttons of the control board.

To control fixture channels.

1. Use the UP/DOWN buttons to find “ Man.C“ menu.

2. Press the ENTER button.

3. Use the UP/DOWN buttons to select desired effect (channel).

List of control channels:

“rEd1” - red LEDs saturations-array1

“GrE1“ - green LEDs saturations-array1

“bLu1“ - blue LEDs saturations-array1

“Whi1“ - white LEDs saturations-array1

“rEd2” - red LEDs saturations-array2

“GrE2“ - green LEDs saturations-array2

“bLu2“ - blue LEDs saturations -array2

“Whi2“ - white LEDs saturations-array2

“MACr“ - colour macros

“Stro.“ - a strobe, shutter

“dimr“ - a dimmer

“F.dim” – a fine dimmer

4. Press the ENTER button and use the UP/DOWN buttons to set value , press the ENTER button to confirm it.

6. 5 Test sequences

Use this menu to run demo-test sequences without an external controller, which will show you some possibilities

of using the CitySource 96.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 26 27

No comments

Robe CitySource 96 WDMX Specifications Page 18