Robe CitySource 96 WDMX Specifications download pdf (Page 19)

CitySource 96 (RGBW)

6.6 Stand-alone setting

The fixtures on a data link are not connected to the controller but can execute pre-set programs which can be

different for every fixture. “Stand-alone operation” can be applied to the single fixture or to multiple fixtures

operating synchronously.

Synchronous operation of multiple fixtures requires that they must be connected on a data link and one of them is

set as a master (“MASt“) and the rest as the slaves (“SLA“). Up to 32 fixtures can be connected in a master/slave

chain. Only one fixture can be set as the master. This option does not function at wireless operation.

Note: Disconnect the fixtures from the DMX controller before master/slave operating, otherwise data collisions can

occur and the fixtures will not work properly. See the chapters “Stand-alone operation“ and “ Master/slave

connection“.

Auto. --- Automatic playback. This function allows you to select the program which will be played after switching

the fixture on. Selected program will be played continuously in a loop.

1. Use the UP/DOWN buttons to find “ St.AL.“ menu.

2. Press the ENTER button.

3. Use the UP/DOWN buttons to select “ Auto“ item.

4. Press the ENTER button.

5. Use the UP/DOWN buttons to select desired program.

6. Press the ENTER button to confirm the choice.

PLAY --- Playing program. By enter to this menu a complete overview of all programs is offered, from which the

program to be run can be selected.

1. Use the UP/DOWN buttons to find “ St.AL.“ menu.

2. Press the ENTER button.

3. Use the UP/DOWN buttons to select desired program.

4. Press the ENTER button. The selected program runs in a loop.

Edit --- Editing a program. The fixture offers 3 freely editable programs (EPG.1-EPG.3) each up to 68 steps. Every

program step includes a fade time-the time taken by the step´s channel status to reach the desired level and a

step time-the total time occupied by the step in the program.

E.g. If “F.tim.“=5 second and “S.tim.“=20 second, effects will go to the desired position during 5 seconds and after

that they will stay in this position for 15 seconds before going to the next prog. step

1. 1. Use the UP/DOWN buttons to find “ St.AL.“ menu and press the ENTER button.

2. Use the UP/DOWN buttons to select “Edit“ menu and press the ENTER button.

3. Use the UP/DOWN buttons to select a program you want to edit (PrG.1-PrG.3 and press ENTER button.

4. Use the UP/DOWN buttons to select a desired program step ("St.01" - "St.68") and press ENTER button.

5. Use the UP/DOWN buttons to select a channel you want to edit and press the ENTER button.

List of editable items:

“P.End” - a total number of the program steps (value 1-68). This value should be set before start

Programming (e.g. if you want to create program with 10 steps, set P.End=10).

“rEd1”- “rEd2”- a red LEDs saturation array1/array2 (0-255)

“GrE1“-“GrE2“ - a green LEDs saturation array1/array2 (0-255)

“bLu1“-“bLu2“ -a blue LEDs saturation array1/array2 (0-255)

“Whi1“ - “Whi2“ – a white LEDs saturation array1/array2 (0-255)

“MACr“ - colour macros (0-255)

“Stro.“ - a strobe, shutter (0-255)

“dimr“ - a dimmer (0-255)

“F.dim”- a fine dimmer (0-255)

“F.tim.“ - a fade time, (0-25.5) seconds

“S.tim.“ - step time, value (0-25.5) seconds

“COPY“. – this item duplicates the current prog. step to the next prog. step. The item “P.End” is increased

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Comments to this Manuals

No comments

Robe CitySource 96 WDMX Specifications Page 19

Comments to this Manuals

Related products and manuals for Stroboscopes & disco lights Robe CitySource 96 WDMX